Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site wateng.UUCP
Path: utzoo!watmath!wateng!pparkinson
From: pparkinson@wateng.UUCP (Peter Parkinson)
Newsgroups: net.auto
Subject: designing EFI system controllers
Message-ID: <1206@wateng.UUCP>
Date: Wed, 11-Jul-84 15:35:43 EDT
Article-I.D.: wateng.1206
Posted: Wed Jul 11 15:35:43 1984
Date-Received: Thu, 12-Jul-84 02:38:34 EDT
Organization: U of Waterloo, Ontario
Lines: 11

   I am interested in designing my own electronic fuel injection system
controller. I am looking for any information that I can get on the subject
including: interface circuits, control algorithms, dead system defaults,
which micro to use/start with, and any advice or pointers anyone would care
to give me. The intended use of this controller is endurance car racing but I
expect that I will also experiment in my street vehicle as well. I am 
especially interested in any references to any literature you may know of. If
there is sufficient interest I can always post a summary to the net.
						Thanks
						  Peter
			{utzoo | decvax | allegra}!watmath!wateng!pparkinson