Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site inuxd.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!mhuxl!ihnp4!inuxc!inuxd!wolenty
From: wolenty@inuxd.UUCP (R Wolenty)
Newsgroups: net.micro.apple
Subject: Apple at 1200 BPS
Message-ID: <589@inuxd.UUCP>
Date: Wed, 25-Jul-84 14:25:35 EDT
Article-I.D.: inuxd.589
Posted: Wed Jul 25 14:25:35 1984
Date-Received: Fri, 27-Jul-84 04:56:53 EDT
Organization: AT&T Consumer Products Div., Indianapolis
Lines: 13



I have a problem using the Apple as a dumb terminal at 1200 bits per
second.  I am using a short assembly language program on an Apple
IIe that monitors the serial port and Apple keyboard port and
writes to the screen using the firmware routine at $FDED.  The
problem is during CR/LF sequences several characters are lost.
I want to know if there is a different subroutine I should be using
or do I have to write my own display driver. Suggestions or comments
are welcome.

				Ron Wolenty (AT&T Consumer Products)
				Indianapolis, IN