Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!burl!mgnetp!ihnp4!houxm!houxz!vax135!cornell!uw-beaver!tektronix!hplabs!sri-unix!ABN.ISCAMS@USC-ISID.ARPA
From: ABN.ISCAMS@USC-ISID.ARPA
Newsgroups: net.micro.cpm
Subject: Re: Question from a Novice
Message-ID: <1106@sri-arpa.UUCP>
Date: Thu, 21-Jun-84 19:35:00 EDT
Article-I.D.: sri-arpa.1106
Posted: Thu Jun 21 19:35:00 1984
Date-Received: Thu, 28-Jun-84 00:54:28 EDT
Lines: 25

Jim,

Is your software asking for a single sided double density (SSDD) option
selection?  If not, and it just does DSDD -- a disk rated at SSDD DOES still
have the magnetic media on that "back" side, and it CAN still be formatted
and written to.  (You must have missed the Great Double-Sided Disk Debate
on the net a few months ago!)

It's just that the manufacturer did not certify or warrant or guarantee that
"back" side for double density or something.  Maybe it WILL do just fine,
and maybe it WON'T!  Only your trying will tell!

Lots of people buy El Cheapo (no offense, please - I do it too) single sided
single density disks, punch a couple of holes to tell their disk drive it
IS double sided (it's a physical thing, telling the disk drive), and go right
ahead and format/use DSDD!  Sometimes it works and sometimes...

Now, I do NOT understand why your disk drive isn't picking up the physical
difference (location of timing holes, square write protect notch) between
SSDD and DSDD - maybe one of our Kaypro owners out there can enlighten us?

Regards,
David Kirschbaum
Toad Hall
ABN.ISCAMS@USC-ISID