Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!mhuxl!houxm!houxz!vax135!cornell!uw-beaver!tektronix!hplabs!sri-unix!RCONN@Simtel20.ARPA
From: RCONN@Simtel20.ARPA
Newsgroups: net.micro.cpm
Subject: ZCPR3 and CP/M 3.0
Message-ID: <437@sri-arpa.UUCP>
Date: Wed, 25-Jul-84 22:37:00 EDT
Article-I.D.: sri-arpa.437
Posted: Wed Jul 25 22:37:00 1984
Date-Received: Sat, 28-Jul-84 08:06:46 EDT
Lines: 16

From:  Richard Conn <RCONN@Simtel20.ARPA>

Yes, ZCPR3, SYSLIB3, Z3LIB, and VLIB all run under CP/M 2.2.  Due to
their direct BIOS calls, they will not run under CP/M 3.0.  Some
degree of modification to the low-level device drivers is required in
order to get the libraries to be useful under CP/M 3.0.

ZCPR3, however, is another problem, since, as a command processor, it
directly loads the COM files it selects, a knowledge of your
bank-switched environment is required.  I suspect that the degree of
modification to get ZCPR3 to run under CP/M 3.0 would be extensive.

Re the files on SIMTEL20 that you referenced, I am not familiar with
them.  I am not moving toward the CP/M 3.0 world.

	Rick