Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!linus!decvax!mcnc!ncsu!uvacs!icase!judith
From: judith@icase.UUCP
Newsgroups: net.micro.cbm
Subject: 1521 heat/info re: modems
Message-ID: <816@icase.UUCP>
Date: Thu, 30-Aug-84 10:12:20 EDT
Article-I.D.: icase.816
Posted: Thu Aug 30 10:12:20 1984
Date-Received: Thu, 13-Sep-84 06:08:36 EDT
Lines: 18

I'm sure this has been covered before, but I'm new to the net.  Now
that I've used it, I have a good reason to get a modem for my 64.
Query: Any recommendations?  I'd like price info included, if possible.

A local club member had a suggestion on the 1521's heat problem.
3/8" x 2 1/2" machine bolts will fit into the recessed screw holes on
the corners of the bottom of the drive and provide 'legs' to allow a
little more air circulation.  Be careful not to screw them too far,
or you might crack the plastic.  2 or 3 turns should be enough.

			Judith Moore
			NASA/LaRC, Hampton, Va.
			inp4!burl!icase!judith
				or
			judith%icase@csnet-relay
				or
			mcnc!uvacs!icase!judith  (I don't understand
						 any of this)