Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/3/84 (WLS Mods); site astrovax.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!allegra!princeton!astrovax!wls
From: wls@astrovax.UUCP (William L. Sebok)
Newsgroups: net.dcom
Subject: DEQNA on Vax
Message-ID: <486@astrovax.UUCP>
Date: Wed, 7-Nov-84 14:58:06 EST
Article-I.D.: astrovax.486
Posted: Wed Nov  7 14:58:06 1984
Date-Received: Fri, 9-Nov-84 06:27:37 EST
Reply-To: wls@astrovax.UUCP (William L. Sebok)
Organization: Princeton Univ. Astrophysics
Lines: 11

On our Vax 750 we have an image display device called a Peritek model VCH-Q.
This is a card that plugs into a Q-bus.  To run this device we have an Emulex
Unibus to Qbus converter that drives a Qbus Expansion Box.  One card plugs into
the Unibus, another into the Qbus, and a cable runs between them.

  Would it be completely off base to plug a DEQNA Ethernet board into this Qbus
expansion box?  The DEQNA is quite a bit cheaper than the DEUNA and anyway
there aren't many slots left on the Unibus (none, unless we unplug something).
-- 
Bill Sebok			Princeton University, Astrophysics
{allegra,akgua,burl,cbosgd,decvax,ihnp4,noao,princeton,vax135}!astrovax!wls