Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site druxi.UUCP
Path: utzoo!watmath!clyde!cbosgd!ihnp4!drutx!druxi!burt
From: burt@druxi.UUCP (SimonB)
Newsgroups: net.micro.apple
Subject: help!
Message-ID: <805@druxi.UUCP>
Date: Fri, 16-Nov-84 17:31:24 EST
Article-I.D.: druxi.805
Posted: Fri Nov 16 17:31:24 1984
Date-Received: Mon, 19-Nov-84 03:29:44 EST
Organization: AT&T Information Systems Laboratories, Denver
Lines: 13

I have an Apple II+ with 48K and want to run a program that requires
about 50-60K. The program would not run on my system as is. I got a 16K
RAM board, and was able to load the program and attempt to run it.
Unfortunately, the program was written for a IIe, which has built in 
up, down, left and right cursur controls on the keyboard. The II+ only
has left and right. To run the program, I need all four. The left and
right work fine, but I can't get the cursur to go up and down. The up and
down controls are in ROM which is zapped by the RAM board. Is there any way
I can get up and down without the built in ROM???

                                              Burt Simon
                                              ihnp4!druxi!burt
                                              303-538-4720