Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Posting-Version: version B 2.10.2 9/18/84; site lanl.ARPA Path: utzoo!watmath!clyde!burl!ulysses!allegra!mit-eddie!godot!harvard!seismo!cmcl2!lanl!crs From: crs@lanl.ARPA Newsgroups: net.micro.mac Subject: Re: mac C compilers Message-ID: <16771@lanl.ARPA> Date: Mon, 26-Nov-84 15:00:31 EST Article-I.D.: lanl.16771 Posted: Mon Nov 26 15:00:31 1984 Date-Received: Wed, 28-Nov-84 04:06:30 EST References: <1882@nsc.UUCP> <571@amdahl.UUCP> Sender: newsreader@lanl.ARPA Distribution: net Organization: Los Alamos National Laboratory Lines: 47 > > I was playing with a Mac today, and I used for a short while the 'Hippo-C' > > package. I didn't do much in-depth, but it looked reasonable. Has anyone > > else used it enough to make a (good or bad) recomendation? What other C > > compilers are there that I should be looking at? > > > > chuq > > -- > > From the Department of Bistromatics: Chuq Von Rospach > > {cbosgd,decwrl,fortune,hplabs,ihnp4,seismo}!nsc!chuqui nsc!chuqui@decwrl.ARPA > > > I recommend that anyone considering a C compiler for the Mac should try > Mac C from Consulair Corp. Mac C was used to write most of Apple's > assembler development system and it is a nice package. > I have been using Mac C for over a month with very good results. > Support from Consulair has been excellent. Their address is: > 140 Campo Drive, Portola Valley, CA 94025 (415)851-3849 > I have no connection with Consulair other than as a satisfied customer. > -- > Stephen J. Langdon ...!{ihnp4,hplabs,amd,nsc}!amdahl!sjl > > [ The article above is not an official statement from any organization > in the known universe. ] I saw today in Electronic Engineering Times (12 Nov 84, p 101) an article titled _New_Development_Software_May_Spur_Mac_Packages. Included with the article was a table listing 22 companies supplying languages for the Mac. Those with entries in the C column are: Company Phone Consulair Corp. 415-851-3849 Hippopotamus 408-730-2601 Manx Software 201-780-4004 Mark Williams 312-472-6659 First Qtr 85 Megamax, Inc. 214-987-4931 Softworks, Ltd. 312-327-7666 I am not familiar with any of these. Charlie Sorsby ...!lanl-a!crs crs@lanl