Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Posting-Version: version B 2.10.2 9/18/84; site brl-tgr.ARPA Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!mhuxj!houxm!whuxlm!harpo!decvax!genrad!teddy!panda!talcott!harvard!seismo!brl-tgr!tgr!LARRY@JPL-VLSI.ARPA From: Larry Carroll Newsgroups: net.micro.cpm Subject: SQueezing & UnSQeezing files Message-ID: <7668@brl-tgr.ARPA> Date: Wed, 23-Jan-85 23:23:56 EST Article-I.D.: brl-tgr.7668 Posted: Wed Jan 23 23:23:56 1985 Date-Received: Sun, 27-Jan-85 07:12:59 EST Sender: news@brl-tgr.ARPA Organization: Ballistic Research Lab Lines: 13 I've copied the XSQ, XUSQ, and LAR programs onto our VAX (under VMS) and compiled/linked/tested them. They work fine, but either I'm using them wrong or our copy of FTP doesn't do a BINARY (image) format file transfer properly. I expected the SQueezed files to begin with hex 76 followed by hex FF, followed by a 16-bit checksum, followed by a file name. But SMALLC.DOQB and SMC-ASM and several others I've copied contain something completely different. Do I run LAR on these files first, the XUSQ? Or what? Larry @ jpl-vlsi Please send replies to the above address. I'm not on INFO-CPM. Thanks. ------