Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84; site watdcsu.UUCP
Path: utzoo!watmath!watdcsu!herbie
From: herbie@watdcsu.UUCP (Herb Chong [DCS])
Newsgroups: net.micro.pc
Subject: topview
Message-ID: <880@watdcsu.UUCP>
Date: Mon, 28-Jan-85 20:11:44 EST
Article-I.D.: watdcsu.880
Posted: Mon Jan 28 20:11:44 1985
Date-Received: Tue, 29-Jan-85 05:49:48 EST
Distribution: net
Organization: U of Waterloo, Ontario
Lines: 20

has anyone had any experience with the performance of topview on an
AT?  i have been using it on a networked PC with a hard disk and so far
only have it configured to run BASIC and DOS commands.  when running
only one BASIC program, everything seems fine.  when running two, both
are running noticeably slower and i am sure that with three, the
processor wouldn't have enough cycles to give reasonable response
time.

Herb Chong, BASc
Computer Consultant 

I'm user-friendly -- I don't byte, I nybble....

UUCP:  {decvax|utzoo|ihnp4|allegra|clyde}!watmath!water!watdcsu!herbie
CSNET: herbie%watdcsu@waterloo.csnet
ARPA:  herbie%watdcsu%waterloo.csnet@csnet-relay.arpa
NETNORTH, BITNET, EARN: herbie@watdcs, herbie@watdcsu
POST:  Department of Computing Services
       University of Waterloo
       N2L 3G1  (519)885-1211 x3524