Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/5/84; site wucs.UUCP
Path: utzoo!watmath!clyde!cbosgd!ihnp4!wucs!sfk
From: sfk@wucs.UUCP (Steve Karasek)
Newsgroups: net.micro.ti
Subject: use of Terminal Emulator II
Message-ID: <710@wucs.UUCP>
Date: Wed, 6-Feb-85 19:15:29 EST
Article-I.D.: wucs.710
Posted: Wed Feb  6 19:15:29 1985
Date-Received: Thu, 7-Feb-85 04:29:08 EST
Organization: Washington U. in St. Louis, CS Dept.
Lines: 22


   I am having trouble getting Terminal Emulator II to work.  I have a terminal
that is set with no parity, 1 stop bit, and 8 data bits.  I set the TE-II
with no parity, but the others I can't choose.  Even so, I should at least
get some garbage sent, but I am not able to send or receive anything (the
transmit light on the modem doesn't light when I type something).  I am able
to send to and receive from the terminal in BASIC when I connect it to the
RS232 card, but if I connect the modem instead, again I get no response.
Any suggestions?
   Thanks in advance.

						Steve Karasek
-- 

Steven Karasek				sfk@wucs.UUCP 
Box 1045 Washington University		(ihnp4!wucs!sfk)
St. Louis, MO 63130   USA		(314)-889-5098
-- 

Steven Karasek				sfk@wucs.UUCP 
Box 1045 Washington University		(ihnp4!wucs!sfk)
St. Louis, MO 63130   USA		(314)-889-5098