Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84; site ucbvax.ARPA
Path: utzoo!dciem!nrcaero!pesnta!amdcad!decwrl!ucbvax!info-vax
From: info-vax@ucbvax.ARPA
Newsgroups: fa.info-vax
Subject: VMZ/32's
Message-ID: <4496@ucbvax.ARPA>
Date: Thu, 31-Jan-85 14:08:31 EST
Article-I.D.: ucbvax.4496
Posted: Thu Jan 31 14:08:31 1985
Date-Received: Fri, 1-Feb-85 21:51:47 EST
Sender: daemon@ucbvax.ARPA
Organization: University of California at Berkeley
Lines: 12

From: Ronald A. Jarrell <JARRELLRA@VPIVAX3.BITNET>


Don't know about a 750, but on our 780 able told us that the boards
work fine depending on what rev level you use.  Manually connect them
in sysgen (because a lot of their boards won't autoconfigure right)
and try it out.  There is a microcode bug on the board under 4.0
that causes, depending on wha you have plugged in and what signals
are present, the first device to connect normally, but all others on
that board must hit Ctl/Q to get any output.

-Ron Jarrell