Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site ttidcb.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!allegra!mit-eddie!godot!harvard!seismo!cmcl2!philabs!ttidca!ttidcb!jackson
From: jackson@ttidcb.UUCP (Dick Jackson)
Newsgroups: net.dcom
Subject: Product Info. Request - Multibus Comm Interface Board
Message-ID: <251@ttidcb.UUCP>
Date: Mon, 28-Jan-85 11:51:01 EST
Article-I.D.: ttidcb.251
Posted: Mon Jan 28 11:51:01 1985
Date-Received: Wed, 30-Jan-85 19:04:39 EST
Organization: TTI, Santa Monica, CA.
Lines: 21



We need to find a bit synchronous comm. interface board that fits in
a Multibus and uses a Motorola 680x0 processor.
I would much appreciate information about products conforming to the
following "spec":

	   - Serial communications interface with 4-8 ports
	   - Multi protocol line interface chip (prefer NEC 7201)
	   - Intelligent, programmable (at least 64 kB RAM, at least
	     2 sockets for x8 EPROM, Motorola 68000 family MPU)
	   - Multibus compatible

I know there are a gillion boards of this type with Intel MPUs, however
we don`t want to change our development system.

Thanks in advance.

Dick Jackson
Citicorp - TTI
Santa Monica, CA.