Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: Notesfiles $Revision: 1.6.2.17 $; site uok.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!ihnp4!inuxc!pur-ee!uiucdcs!uok!jatranks
From: jatranks@uok.UUCP
Newsgroups: net.micro.apple
Subject: Response to graphics dump
Message-ID: <4500011@uok.UUCP>
Date: Sun, 20-Jan-85 16:08:00 EST
Article-I.D.: uok.4500011
Posted: Sun Jan 20 16:08:00 1985
Date-Received: Wed, 23-Jan-85 05:03:30 EST
Lines: 22
Nf-ID: #N:uok:4500011:000:1086
Nf-From: uok!jatranks    Jan 20 15:08:00 1985

In reply to Screen dump in graphics mode brl-tgr!scooper

I have an Apple //e with a C.ITOH prowriter.  It is the same
thing as apple's old DMP.  I use a TYMAC parallel interface.  It
type of software that you are using, but the TYMAC card lets you
print whatever is in the hires screen from BASIC.  I know that
the old Apple DMP came with screen dump software that was a
machine languge program.  If your drawing program is in basic,
using their screen dump in conjunction with the ampersand 
vector from basic.  If it is not in basic.  I suggest trying to
break out of the program and saving the screen onto the disk and then
running the DMP software or initiate the ^IGD2 command (TYMAC) which
prints the second hires screen in double size(? double means bigger
than normal not double screen size).  For more information,
mail me a letter with some more specifics in it about what type of
software and things that I might need to know to help you better.

P.S.  I would also like to know about anyone with an Apple //e
termcap that uses the 80-col card.

		Todd Ranks   uok!jatranks