Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site decwrl.UUCP
Path: utzoo!watmath!clyde!cbosgd!ihnp4!zehntel!hplabs!pesnta!amdcad!decwrl!dec-rhea!dec-golly!bennison
From: bennison@golly.DEC
Newsgroups: net.rec.photo
Subject: mat cutter
Message-ID: <271@decwrl.UUCP>
Date: Mon, 21-Jan-85 09:41:02 EST
Article-I.D.: decwrl.271
Posted: Mon Jan 21 09:41:02 1985
Date-Received: Wed, 23-Jan-85 19:12:39 EST
Sender: daemon@decwrl.UUCP
Organization: DEC Engineering Network
Lines: 18

---
Brookstone carries a mat cutting system for under $50.  To quote their
catalog:  "Cuts borders, nicely beveled at 60 degrees, from 1 1/2" to
6 3/8" wide, in 1/8" or 1/16" increments.  Cuts as long as 32" (longer
cuts may be made by simply shifting the mat).  Very easy to use, even if
you're a lefty.  Comprehensive 96 page booklet explains techniques..."

It includes a straight-edge and cutter.  I've never used it, but Brookstone's 
stuff is usually pretty good.  Send for a catalog to:

		Brookstone Company
		127 Vose Farm Road
		Peterborough, NH  03458


    				Vick Bennison
    				...decvax!decwrl!rhea!tools!bennison
    				(603) 881-2156