Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 (Tek) 9/28/84 based on 9/17/84; site hammer.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!ihnp4!zehntel!hplabs!tektronix!orca!hammer!steveg
From: steveg@hammer.UUCP (Steve Glaser)
Newsgroups: net.works
Subject: Re: 32032 UNIX
Message-ID: <1089@hammer.UUCP>
Date: Sat, 19-Jan-85 08:13:02 EST
Article-I.D.: hammer.1089
Posted: Sat Jan 19 08:13:02 1985
Date-Received: Wed, 23-Jan-85 06:45:12 EST
References: <291@topaz.ARPA>
Reply-To: steveg@hammer.UUCP (Steve Glaser)
Organization: Tektronix, Wilsonville OR
Lines: 19
Summary: 

>From: Tom Blenko  <blenko@rochester.arpa>
>
>The Tektronix box does run on a 16/32K. But the 16K only runs at
>4 MHz (which they all somehow forgot to mention in the WORKS digest).
>Look before you leap!
>
>	Tom

Now wait just a minute here.  Currently Tek 6000 workstations run at 8Mhz.
We will be moving to 10Mhz as soon as the chips are available in sufficient
quantity.  The 10 Mhz systems we have in house work just fine.

We never did run at 4 Mhz.  There were some early software development
and demo boxes that ran at 5 Mhz.

	Steve Glaser
	Tektronix, ECS Engineering
	tektronix!steveg		UUCP
	steveg.tektronix@csnet-relay	CSNET/ARPANET