Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84; site petrus.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!allegra!bellcore!petrus!karn
From: karn@petrus.UUCP
Newsgroups: net.analog
Subject: Re: "Just Wrap"
Message-ID: <292@petrus.UUCP>
Date: Wed, 20-Feb-85 00:06:29 EST
Article-I.D.: petrus.292
Posted: Wed Feb 20 00:06:29 1985
Date-Received: Fri, 22-Feb-85 08:05:50 EST
References: <195@ihlpg.UUCP>
Distribution: net
Organization: Bell Communications Research, Inc
Lines: 9

I don't know if this product is the same, but some time ago (10 years?)
I used (or tried to use) something called "slit 'n wrap" that sounds
like a similar device to "just wrap". It was terrible. The wire insulation
had to be thin enough for the pins to cut it to make contact, an as a
result twhenever a wire was just dragged over a pin (without intention
of making a contact) the insulation was cut, resulting in a short.
The whole job had to be redone.  What a mess.

Phil