Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!linus!philabs!cmcl2!seismo!harvard!godot!ima!inmet!james
From: james@inmet.UUCP
Newsgroups: net.lan
Subject: Re: Orphaned Response
Message-ID: <1974@inmet.UUCP>
Date: Wed, 20-Feb-85 01:31:54 EST
Article-I.D.: inmet.1974
Posted: Wed Feb 20 01:31:54 1985
Date-Received: Sun, 24-Feb-85 04:28:21 EST
Lines: 11
Nf-ID: #R:riv05:-24700:inmet:4600001:177600:622
Nf-From: inmet!james    Feb 17 11:17:00 1985

We have been using Pronet 10Mb for two years, on a mix of 11/70s
and Vaxen.  The hardware is trouble-free, it is easy to forget
it is there.  We use home-grown datagram-style protocol.  The
drivers have been ported to 4.1bsd and 4.2bsd with not very
much trouble.  From the programmer's point of view, you push
the bits in here, they come out over there, with nary a problem.
We also have Ethernet and have found it to be much more
troublesome in configuration and operation.  I just wish there
were more software support for the Pronet.
----James A.J. Triplett   Intermetrics
	{esquire,harpo,decvax}!cca!ima!inmet!james