Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: Notesfiles $Revision: 1.6.2.13 $; site iuvax.UUCP
Path: utzoo!watmath!clyde!cbosgd!ihnp4!inuxc!iuvax!apratt
From: apratt@iuvax.UUCP
Newsgroups: net.micro.68k
Subject: Tiny Basic for 68K ECB
Message-ID: <3500008@iuvax.UUCP>
Date: Mon, 18-Feb-85 16:34:00 EST
Article-I.D.: iuvax.3500008
Posted: Mon Feb 18 16:34:00 1985
Date-Received: Fri, 22-Feb-85 07:41:18 EST
Lines: 18
Nf-ID: #N:iuvax:3500008:000:944
Nf-From: iuvax!apratt    Feb 18 16:34:00 1985


There is a Tiny Basic interpreter available for the 68K: it is described
in the current Doctor Dobbs' Journal.  Unfortunately, the source code presented
(downloaded from an RCP/M) does not assemble with the Motorola 68000 Cross
Macro Assembler. In fact, it causes an Assembler Error (address fault or
some such thing) and a post-mortem dump from my VAX/VMS. However, there is a
CP/M assembler with which it DOES compile; if you would like the .OBJ file
(S-Record format) for the tiny BASIC interpreter, send mail to me (I do not
generally read net.micro.68k). The interpreter is designed for the M68KECB
Educational Computer Board, and works like a charm. It comes with some
sample programs, too.  If there is sufficient interest, I will post to
net.sources. In any case, I can NOT send it to ARPA addresses. Please do not
post requests to this (or any other) notesfile.  Thank you.


----
						-- Allan Pratt
					...ihnp4!inuxc!iuvax!apratt