Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site gymble.UUCP
Path: utzoo!decvax!ittvax!dcdwest!sdcsvax!sdcrdcf!hplabs!hao!seismo!umcp-cs!gymble!bennet
From: bennet@gymble.UUCP (Tom Bennet)
Newsgroups: net.micro
Subject: z100 software inquiry.
Message-ID: <70@gymble.UUCP>
Date: Tue, 12-Feb-85 23:07:29 EST
Article-I.D.: gymble.70
Posted: Tue Feb 12 23:07:29 1985
Date-Received: Fri, 15-Feb-85 00:41:07 EST
Distribution: na
Organization: U of Maryland, Laboratory for Parallel Computation, C.P., MD
Lines: 9

An acquaintance of mine has a Zenith z100 computer.  He would like to use a
digitizing tablet to enter coordiates of engineering drawings,  but
he has been unable to find software for this purpose which runs on the z100.
(He has a plotter and software which reproduce drawings from hand-entered
coordinates.)  Any clues about who might sell digitizer software for this
machine would be greatly appreciated.  Many thanks!

				Tom Bennet
				...!ihnp4!seismo!umcp-cs!bennet