Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: Notesfiles $Revision: 1.6.2.17 $; site uok.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!ihnp4!inuxc!pur-ee!uiucdcs!uok!chumphre
From: chumphre@uok.UUCP
Newsgroups: net.micro.apple
Subject: Re: A neat bug in Apple DOS
Message-ID: <4500014@uok.UUCP>
Date: Tue, 19-Feb-85 13:41:00 EST
Article-I.D.: uok.4500014
Posted: Tue Feb 19 13:41:00 1985
Date-Received: Fri, 22-Feb-85 10:07:57 EST
References: <258@nmtvax.UUCP>
Lines: 24
Nf-ID: #R:nmtvax:-25800:uok:4500014:37777777600:1038
Nf-From: uok!chumphre    Feb 19 12:41:00 1985


 Thank you Mr. Muller for your helpful information, I have 10's of disks
with this exact problem; but since my power supply bit the bit bucket
I have no way to fix them.  Could you possibly tell us netlanders how
to fix a power supply?  I know that you yourself have gone through
several.  
  It all started about 3 months ago when I flipped the switch on and
nothing but garbage appeared on the screen.  Eventually, the power
supply would warm up enough to run my one disk drive for a few minutes;
but after that few minutes the 12v output dropped too low to run the
spindle and stepper motors simultaneously.
  Now it takes about 6 hours befor the computer has enough power to 
generate a fully synchronized video signal.
  Is there anything I can do about this other than shelling out the
$45 for a power supply exchange?  
  Any help would be greatly appreciated.



		Jay McGinnis
		...!ctvax!uokvax!uok!chumphre

P.S.  The first part of this message is jokingly facetious.  Also, are
      you still using that same old Apple II ??