Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site inuxd.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!mhuxb!mhuxn!mhuxm!mhuxj!houxm!ihnp4!inuxc!inuxd!rcf
From: rcf@inuxd.UUCP (R Fitch)
Newsgroups: net.micro.cbm
Subject: Cardco +G and Music Const. Set
Message-ID: <709@inuxd.UUCP>
Date: Mon, 18-Feb-85 10:08:42 EST
Article-I.D.: inuxd.709
Posted: Mon Feb 18 10:08:42 1985
Date-Received: Wed, 20-Feb-85 03:24:39 EST
Organization: AT&T Consumer Products Div., Indianapolis
Lines: 14



	My Cardco +G never worked with graphics so I copied
a ROM from a freinds and now appears to work. The problem is
with the Music Construction Set software print command. The
print head cycles rapidly back and forth approximately one
inch as if it were scanning. It takes over 15 minutes just to
draw the Bass and Treble Cleff symbols and much wear and tear
on the printer mechanism. I am using an Epson RX-80 printer.
Has anyone else seen this problem or have I not got the correct
ROM yet ?????

		Thanks in Advance!     R. C. Fitch