Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84; site bmcg.UUCP
Path: utzoo!utcs!lsuc!pesnta!hplabs!sdcrdcf!sdcsvax!bmcg!bprice
From: bprice@bmcg.UUCP (Bill Price)
Newsgroups: net.micro.cbm
Subject: VIC-20 video help needed
Message-ID: <1613@bmcg.UUCP>
Date: Mon, 25-Feb-85 15:42:16 EST
Article-I.D.: bmcg.1613
Posted: Mon Feb 25 15:42:16 1985
Date-Received: Wed, 27-Feb-85 10:46:52 EST
Reply-To: bprice@bmcg.UUCP (Bill Price)
Organization: Burroughs Corporation, San Diego
Lines: 17
Summary: 

I have a problem.  A friend has asked me to (try to) fix her VIC-20.  I have
found the trouble, but I can't fix it without some information.  Would someone,
please, mail me either the answer, or a pointer to where the answer is?

Two of the wires have broken in the DIN connector on the cable to the RF
modulator box.  The DIN connector was not put together very well--the strain
relief wasn't crimped to the cable!  So, the question is, where do the wires
go?  Which wire to which pin?  I don't know how standard the RF Modulator is,
across production runs, but I can match up the wires.

Thanks.

--Bill Price

-- 
--Bill Price    uucp:   {decvax!ucbvax  philabs}!sdcsvax!bmcg!bprice
                arpa:?  sdcsvax!bmcg!bprice@nosc