Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/17/84; site plus5.UUCP
Path: utzoo!watmath!clyde!cbosgd!ihnp4!plus5!eric
From: eric@plus5.UUCP (Eric W. Kiebler)
Newsgroups: net.micro.mac
Subject: macget, C, and Everything
Message-ID: <610@plus5.UUCP>
Date: Mon, 25-Feb-85 02:24:00 EST
Article-I.D.: plus5.610
Posted: Mon Feb 25 02:24:00 1985
Date-Received: Wed, 27-Feb-85 06:25:33 EST
Distribution: net
Organization: Plus Five Computer Services, St. Louis
Lines: 23

Well, the Mac has certainly been a programming experience so far...

Has anyone out there tried to get macput/macget running on an 808x
based Xenix machine?  I did a quick port to the Altos 586 box and
macget dies in fread() somewhere in tgetrec.  I compiled the bugger
on a TRS Mod 16 and it ran well (as well as can be expected on a TRS).
I have heard that 4 ports on the Altos are seriously braindamaged when
pushed over the 1200 baud limit.

When I was leafing through the Aztec C manual I noticed that there were
no calls to the sound driver routines and that the OS Utilities seemed
to be absent (Like the Delay routine).  Have they covered these with a
new release yet?

I recently saw a document that describes the MacDraw PICT format, and
called for suggestions.  Anyone care to discuss this?

eric
-- 
..!ihnp4!wucs!plus5!eric	
..!ihnp4!plus5!eric
(314) 725-9492