Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site vax135.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!mhuxb!mhuxn!mhuxm!mhuxi!vax135!ees
From: ees@vax135.UUCP (Gene Sampieri)
Newsgroups: net.micro.ti
Subject: TI RS232 to ANY MODEM
Message-ID: <965@vax135.UUCP>
Date: Fri, 15-Feb-85 09:24:21 EST
Article-I.D.: vax135.965
Posted: Fri Feb 15 09:24:21 1985
Date-Received: Sat, 16-Feb-85 06:23:43 EST
Organization: AT&T Bell Labs, Holmdel, NJ
Lines: 29



Standard NULL-MODEM

The following table gives the connections for the standard NULL-MODEM as
sold by most computer supply comanies.

		CONN-A	CONN-B
		--------------

		1	1
		2	3
		3	2
		4,5	8
		6,22	20
		7	7
		8	4,5
		20	6,22
		22	4,5

This will work with most modem without modification. I use a Hayes 1200
and this. I have also used an ATT made by Penril that neesd pin 20 (DTR)
at the modem end tied to 6 (DSR) of the same end. Others I know who use
various modems from acoustic couplers to dirrect connect use it one of
two ways.

Gene Sammpieri
ATT-Bell Labs
...vax135!ees