Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: Notesfiles $Revision: 1.6.2.17 $; site infoswx.UUCP
Path: utzoo!linus!philabs!cmcl2!seismo!harvard!talcott!panda!genrad!decvax!bellcore!allegra!ulysses!mhuxr!ihnp4!inuxc!pur-ee!uiucdcs!infoswx!charisse
From: charisse@infoswx.UUCP
Newsgroups: net.unix-wizards
Subject: Re: Vax 750 correctable memory errors
Message-ID: <37700004@infoswx.UUCP>
Date: Thu, 21-Feb-85 17:39:00 EST
Article-I.D.: infoswx.37700004
Posted: Thu Feb 21 17:39:00 1985
Date-Received: Sun, 24-Feb-85 03:00:40 EST
References: <8042@brl-tgr.UUCP>
Lines: 13
Nf-ID: #R:brl-tgr:-804200:infoswx:37700004:000:549
Nf-From: infoswx!charisse    Feb 21 16:39:00 1985


If you are using DEC memory, we have experienced the same thing.
We get soft ecc errors on a particular board and they just go
on an on.  I've never tried just rebooting, our DEC rep said it
was probably a heat problem, so we shut down the machine and
yank each of the boards out and stuff them in again. We have run
for as long as 10 days before bothering to shut the system down
and have never had a hard error.  I'd be interested in any 
information about this problem. Thanx


charisse castagnoli
{ihnp4, allegra!convex, ctvax}!infoswx!charisse