Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: Notesfiles $Revision: 1.6.2.17 $; site uiucdcsb.UUCP
Path: utzoo!watmath!clyde!bonnie!akgua!whuxlm!whuxl!houxm!ihnp4!inuxc!pur-ee!uiucdcsb!dollas
From: dollas@uiucdcsb.UUCP
Newsgroups: net.wanted
Subject: PC board information wanted
Message-ID: <12500017@uiucdcsb.UUCP>
Date: Fri, 15-Feb-85 04:59:00 EST
Article-I.D.: uiucdcsb.12500017
Posted: Fri Feb 15 04:59:00 1985
Date-Received: Mon, 18-Feb-85 04:35:39 EST
Lines: 20
Nf-ID: #N:uiucdcsb:12500017:000:933
Nf-From: uiucdcsb!dollas    Feb 15 03:59:00 1985


   We are presently working on a small-scale version of a parallel machine
called the UNIFIELD. Soon we will need  about 70 PC boards for the parallel 
part. Each board is expected to be double-sided with roughly 100 ICs. Plated 
through holes will probably be necessary, as well as some provision for external
connection. 
   There is one limitation: money (isn't it always the case?). We probably will
be able to spend about $3000 for all the boards, ie roughly $40 per board. 
Some of the prices I heard are rather hair raising, but it appears that there
is a lot of fluctuation in the prices depending on several factors. 
   We would appreciate any information/comments/suggestions on the subject.

   Thank you for your time (you already read this far, right?) 

   Apostolos Dollas
   Information Engineering Lab
   Dept. of Computer Science
   University of Illinois at Champaign-Urbana

   ...!ucbvax!pur-ee!uiucdcs!dollas