Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site cbneb.UUCP
Path: utzoo!watmath!clyde!cbosgd!cbsck!cbneb!adm
From: adm@cbneb.UUCP
Newsgroups: net.auto
Subject: Re: hot engine
Message-ID: <3032@cbneb.UUCP>
Date: Tue, 12-Mar-85 12:22:35 EST
Article-I.D.: cbneb.3032
Posted: Tue Mar 12 12:22:35 1985
Date-Received: Wed, 13-Mar-85 02:25:48 EST
Sender: adm@cbneb.UUCP
Organization: AT&T Bell Laboratories, Columbus, OHIO
Lines: 10
Nf-ID: #R:cvl:-12800:cbnap:9500008:000:334
Nf-From: cbnap!tel    Mar 12 11:23:00 1985


 Recheck your water pump.  I have heard of pumps freezing and breaking
 the pump rotor free from the pulley shaft.  It may turn but be slipping
 a lot, hence it provides a minimum of cooling but heats up under heavy 
 load or long duration. Checking for this probably requires removal
 of the pump.	Good luck!

  ihnp4!cbnap!tel		Tom