Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site aesat.UUCP
Path: utzoo!aesat!bmw
From: bmw@aesat.UUCP (Bruce Walker)
Newsgroups: net.micro,net.wanted.sources
Subject: Need a PAL assembler source
Message-ID: <373@aesat.UUCP>
Date: Mon, 25-Mar-85 10:03:09 EST
Article-I.D.: aesat.373
Posted: Mon Mar 25 10:03:09 1985
Date-Received: Mon, 25-Mar-85 13:16:11 EST
Reply-To: bmw@aesat.UUCP (Bruce Walker)
Organization: AES Data Inc., Mississauga Ont., Canada
Lines: 17

I know that a version of PALASM is printed in the MMI databook*, but it's in
Fortran and BASIC and it could take years to untangle/figure it out.  What I
would like to see, if anyone has it, is a version of *some* program designed
to convert *some* (reasonable) PAL syntax into fuse link data.   Even if the
program just checks the input for validity (for a given PAL type) I would be
better off than I am now with the groaty DataIO user-interface.

As usual,  sources in C would be best, although if someone has just typed in
the PALASM20 source, I could still use that.

Thanks in advance!

Bruce Walker     {allegra,ihnp4,linus,decvax}!utzoo!aesat!bmw

-----
*PAL Programmable Array Logic Handbook, Second Edition, (c)1981 MMI Inc.
PAL is a registered (no pun intended) trademark of those clever MMI guys.