Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84; site brl-tgr.ARPA
Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!mhuxt!houxm!whuxl!whuxlm!akgua!mcnc!philabs!cmcl2!seismo!brl-tgr!tgr!jrodrig@MITRE-GATEWAY.ARPA
From: jrodrig@MITRE-GATEWAY.ARPA (jose rodriguez)
Newsgroups: net.micro
Subject: Re: C64 Reset Circuit
Message-ID: <9446@brl-tgr.ARPA>
Date: Fri, 22-Mar-85 14:47:08 EST
Article-I.D.: brl-tgr.9446
Posted: Fri Mar 22 14:47:08 1985
Date-Received: Tue, 26-Mar-85 05:02:01 EST
Sender: news@brl-tgr.ARPA
Lines: 15



An outfit called "Public Domain Software" sells a little DIN plug
with a switch in the back that connects to the serial bus. The switch
just connects two lines together, ground and reset (i think).

It has two problems though: resets every device in your serial bus and
takes over one of your daisy chain ports. I had trouble when I added
a CARDCO +G card (printer interface) because this card had no second
DIN connector. (The C64 disk drive has two though).

If you can't find their addr in the mags. drop me a line.

Jose
(soon to change) jrodrig@mitre-gw