Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84; site brl-tgr.ARPA
Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!mhuxt!houxm!whuxl!whuxlm!akgua!mcnc!philabs!cmcl2!seismo!brl-tgr!tgr!LENOIL@MIT-XX.ARPA
From: LENOIL@MIT-XX.ARPA (Robert S. Lenoil)
Newsgroups: net.micro
Subject: Re: C64 Reset Circuit
Message-ID: <9441@brl-tgr.ARPA>
Date: Fri, 22-Mar-85 13:27:47 EST
Article-I.D.: brl-tgr.9441
Posted: Fri Mar 22 13:27:47 1985
Date-Received: Tue, 26-Mar-85 05:16:21 EST
Sender: news@brl-tgr.ARPA
Lines: 9

I've installed a reset key, and yes, I do it the "nasty" way; a pushbutton
switch that shorts the reset line to ground.  Note that you can get at the
reset line from the user port, so if you have a connector, you can just solder
on a switch to the connector, plug it in, and presto...reset switch without
hole in case.  (Reset is also available at the expansion port, but that's a
non-standard connector.)

Robert Lenoil
-------