Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84 exptools; site ihlpg.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!ihnp4!ihlpg!jcvjp
From: jcvjp@ihlpg.UUCP (pycroft)
Newsgroups: net.micro.apple
Subject: Ultraterm Card with Pascal on a 2+
Message-ID: <248@ihlpg.UUCP>
Date: Tue, 12-Mar-85 17:55:31 EST
Article-I.D.: ihlpg.248
Posted: Tue Mar 12 17:55:31 1985
Date-Received: Wed, 13-Mar-85 01:24:58 EST
Distribution: net
Organization: AT&T Bell Laboratories
Lines: 26

I've recently bought an Ultraterm 80-column card for my Apple 2+. It
works with Apple DOS and with CP/M, but Apple Pascal will not boot
with the Ultraterm installed (or even inserted, but with the monitor
cable not connected).  This is the case for an Apple 1 disk which worked 
fine before the Ultraterm arrived, and also for an Apple 1 disk on which
the file SYSTEM.MISCINFO has the 2 paremeter changes:
   SCREEN WIDTH = 80 (was 79)  and  HAS LOWER CASE = TRUE (was false)
This latter disk will also boot with the Ultraterm removed.

The full configuration is:
Apple 2+ with 2 disk drives
Amdek Color 1 monitor
NEC PC 8023A-C printer

Slot Usage:
0 = 16K RAM card (Microsoft)
1 = printer interface (Grappler +)
2 not used
3 = Ultraterm
4 + CP/M card ("Starcard 2.0"....the shift mod wire & clip installed
                came with this)
5 not used
6 = dual disk controller (Apple)
7 not used

I would be grateful for any suggestions as to how to solve this problem.