Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84; site amdcad.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!allegra!amdcad!jimb
From: jimb@amdcad.UUCP (Jim Budler)
Newsgroups: net.micro.mac
Subject: Modify minifinder window
Message-ID: <1066@amdcad.UUCP>
Date: Wed, 10-Apr-85 03:03:35 EST
Article-I.D.: amdcad.1066
Posted: Wed Apr 10 03:03:35 1985
Date-Received: Thu, 11-Apr-85 00:04:49 EST
Reply-To: jimb@amdcad.UUCP (Jim Budler)
Organization: AMDCAD, Sunnyvale, CA
Lines: 93


 Here, from Compuserve, is a nice article on how to modify the minifinder
window in the system file to a larger more stylish window similar
to the one in Microsoft Word.  




Using the Resource Editor, open the System File.
Then open DITL. Then open DITL -4000. 
Change the information in here to the following:

Place holder   0
Display rect     68    246    86    314
Item type       4
Item info          OPEN

Place holder    0
Display rect      9999    9999    9999    9999
Item type        132
Item info

Place holder    0
Display rect      96    246    114    314
Item type        4
Item info           CANCEL

Place holder    0
Display rect      36    242    52    400
Item type        128
Item info

Place holder    0
Display rect      68    335    86    403
Item type        4
Item info           EJECT

Place holder    0
Display rect      96    335    114    403
Item type        4
Item info           DRIVE

Place holder    0
Display rect      4    4    118    221
Item type        0
Item info

Place holder    0
Display rect      4    220    118    236
Item type        0
Item info

Place holder    0
Display rect      64    324    118    325
Item type        0
Item info

Place holder    0
Display rect      8    260    24    405
Item type        136
Item info

Place holder    0
Display rect      0    0    0    0
Item type        128
Item info

Okay, when that is done, and you have closed it,  go open the DLOG. 
Now open DLOG ID=-4000. Now change it to match the following:

boundsRect    38    31    160    438
procID    1
visible                         (false)
goAway                       (false)
refCon     0
items      ID      -4000
title     GF
   

That should do it! 
 
I haven't had any problems using this with any applications, although
sometimes the minifinder will appear off-center.

		    Ed Edell
		    74216,1312 Compuserve

-- 
 Jim Budler
 Advanced Micro Devices, Inc.
 (408) 749-5806
 UUCPnet: {ucbvax,decwrl,ihnp4,allegra,intelca}!amdcad!jimb
 Compuserve:	72415,1200