Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 (Tek) 9/28/84 based on 9/17/84; site mako.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!ihnp4!houxm!vax135!cornell!uw-beaver!tektronix!orca!mako!seifert
From: seifert@mako.UUCP (Snoopy)
Newsgroups: net.audio
Subject: Re: Speaker Physics
Message-ID: <691@mako.UUCP>
Date: Wed, 10-Apr-85 00:25:15 EST
Article-I.D.: mako.691
Posted: Wed Apr 10 00:25:15 1985
Date-Received: Thu, 11-Apr-85 00:41:58 EST
References: <464@umd5.UUCP>
Reply-To: seifert@mako.UUCP (Snoopy)
Distribution: net
Organization: The Daisy Hill Puppy Farm
Lines: 22
Summary: 

In article <464@umd5.UUCP> don@umd5.UUCP writes:

> Most speakers have woofer crossovers at 1,000 Hz.

Most contributors to this forum know that speakers vary much too
widely to make absurd generalisations(sp?) such as the above.

Sounds like you're talking about a two-way system, with conventional
type drivers and enclosure.  By the time you add up all the three-way,
four-way, and up systems, the one-way systems by Bose, Ohm, and possibly
others, the non-conventional stuff by Ohm (again), Magnapan, Quad, etc.,
I suspect that woofer crossovers near 1000 Hz (much less *at* 1kHz)
are quite in the minority.

You're getting closer, at least you're not off by several orders
of magnitude this time.  :-)

        _____
        |___|           the Bavarian Beagle
       _|___|_               Snoopy
       \_____/          tektronix!mako!seifert
        \___/