Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84; site amdcad.UUCP
Path: utzoo!decvax!bellcore!allegra!amdcad!mike
From: mike@amdcad.UUCP (Mike Parker)
Newsgroups: net.rec.wood,net.consumers
Subject: Re: Table saws, Grizzly
Message-ID: <901@amdcad.UUCP>
Date: Sun, 31-Mar-85 13:34:39 EST
Article-I.D.: amdcad.901
Posted: Sun Mar 31 13:34:39 1985
Date-Received: Mon, 1-Apr-85 02:59:12 EST
References: <721@sabre.UUCP> <849@amdcad.UUCP>
Distribution: na
Organization: AMDCAD, Sunnyvale, CA
Lines: 22

>                        Currently, a friend has been using
> this equip. more than I, and I'm sure he'd have something
> to add.  Mike, are you there?
> 
> Kevin
> ucbvax!kevin

Yeah, I'm here.

I just sent a reply by E-mail. But I'll say it again for the
net. Grizzly gave you a damn good deal on your jointer and
planer. I've put small amounts of almost every hardwood through
them and about 200 board feet of 5/4 sugar maple. All has worked
out very well.

You didn't mention that we had a little wiring to do when the 
equipment came. One came with the wrong plug ( a 110 plug on
a 220 motor ) the other came with no plug. Quick trip to the
hardware store put us in business.

Mike @ AMDCAD