Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: notesfiles
Path: utzoo!watmath!clyde!bonnie!akgua!sdcsvax!sdcrdcf!hplabs!hp-pcd!hpfclm!bruce
From: bruce@hpfclm.UUCP (bruce)
Newsgroups: net.rec.wood
Subject: Re: Orphaned Response
Message-ID: <17800001@hpfclm.UUCP>
Date: Mon, 15-Apr-85 18:42:00 EST
Article-I.D.: hpfclm.17800001
Posted: Mon Apr 15 18:42:00 1985
Date-Received: Mon, 8-Apr-85 00:43:46 EST
References: <-99400@gloria.UUCP>
Organization: Hewlett-Packard - Fort Collins, CO
Lines: 16
Nf-ID: #R:gloria:-99400:hpfclm:17800001:37777777600:606
Nf-From: hpfclm!bruce    Apr  2 15:42:00 1985


:-)

>What's a good finish for a wooden dishrack for wet dishes?

Polyurethane, at least three coats- preferrably 6.  I like a product
called "Last 'n Last", but any reasonable polyurethane (gloss is the most
durable) should work well. For new wood, seal the wood with a thin coat
(drying time of >20hrs between additional coatings seems best for me).
Sand lightly (220 grit or finer- don't use steel wool) between coats. A
bristle brush works (and lasts) the best. Clean the brush with mineral 
spirits....

Bruce 'Measure twice, cut once' Bergmann
HP, Fort Collins, Colorado, 80525
hplabs!hpfcla!bruce