Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: notesfiles
Path: utzoo!watmath!clyde!bonnie!akgua!sdcsvax!sdcrdcf!hplabs!hp-pcd!hp-dcd!donn
From: donn@hp-dcd.UUCP (donn)
Newsgroups: net.sources
Subject: Re: dial-in & dial-out on SysIII/V modem
Message-ID: <21900002@hp-dcd.UUCP>
Date: Tue, 9-Apr-85 12:30:00 EST
Article-I.D.: hp-dcd.21900002
Posted: Tue Apr  9 12:30:00 1985
Date-Received: Sun, 7-Apr-85 04:49:38 EST
References: <9483@brl-tgr.UUCP>
Organization: Hewlett-Packard - Fort Collins, CO
Lines: 20
Nf-ID: #R:brl-tgr:-948300:hp-dcd:21900002:000:609
Nf-From: hp-dcd!donn    Apr  1 09:30:00 1985

Mark:

You're working too hard!

That feature is already present on all HP-UX Series 200 systems, and
on HP-UX Series 500, release 4.0 and later.

It's done in the kernel and requires no code modification!

See page 99 of the Series 200 System Admin Manual, page 80 for the
Series 500, and page 21 f.f. in the Asynchronous Communications Guide.

I admit the manual isn't real clear, but a single line can be used in both
dial-in and dial-out mode.

Donn Terry
HP Ft. Collins, Co.

P.S.  Sorry to be slow on the uptake, but your message just got here
today; no, this response is NOT an April Fool's joke :-) .