Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84; site denelcor.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!allegra!mit-eddie!genrad!panda!talcott!harvard!seismo!hao!denelcor!lmc
From: lmc@denelcor.UUCP (Lyle McElhaney)
Newsgroups: net.unix-wizards,net.bugs.4bsd
Subject: Re: panic: tbuf par fault
Message-ID: <734@denelcor.UUCP>
Date: Sat, 13-Apr-85 02:33:45 EST
Article-I.D.: denelcor.734
Posted: Sat Apr 13 02:33:45 1985
Date-Received: Tue, 16-Apr-85 00:22:04 EST
References: <632@dataio.UUCP> <149@yetti.UUCP>
Organization: Denelcor, Aurora, Colorado
Lines: 27
Xref: watmath net.unix-wizards:12817 net.bugs.4bsd:1462

> In article <632@dataio.UUCP> bossert@dataio.UUCP (John Bossert) writes:
> >I've not seen any discussion on this subject for quite some time.  Has
> >anyone fixed this bug on 750's/4.2bsd?  Thanks much.

> Chalk me up as another interested party.  I wanna know!!  In the rev. 7 kit
> notes DEC writes that ULTRIX machines should first load the diagnostic
> supervisor before starting ULTRIX.  UUGGHHH!!!   Is there SOMEBODY out
> there that knows which registers to hit, and how to read the micro-code file?

To reinterate what has gone before, the Rev 7 update for the 750 does some
fixing of the tbuf parity fault problem; I have been warned by our CE,
however, that some UNIX sites have been seeing cache parity errors after Rev 7
is installed. We had it done a month ago; no crashes yet.

The Rev 7 update is hardware and new microcode (Rev 99). In order to make
the microcode work, part of the Rev 7 update is to install writable
control store, which must of course be loaded.

Jim McKie has put together a package containing a new version of boot which
knows how to load the microcode, a uuencoded file of the microcode patches,
and a fixed standalone uda driver. It worked for us like a charm. If you
need it, just ask.

Lyle McElhaney
-- 
Lyle McElhaney
{hao, stcvax, brl-bmd, nbires, csu-cs} !denelcor!lmc