Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84; site ucla-cs.ARPA
Path: utzoo!watmath!clyde!bonnie!akgua!sdcsvax!sdcrdcf!trwrb!trwrba!cepu!ucla-cs!koen
From: koen@ucla-cs.UUCP
Newsgroups: net.info-terms
Subject: termcap problem Apple IIe / 80 Columns
Message-ID: <4768@ucla-cs.ARPA>
Date: Thu, 11-Apr-85 13:22:05 EST
Article-I.D.: ucla-cs.4768
Posted: Thu Apr 11 13:22:05 1985
Date-Received: Sun, 14-Apr-85 02:34:22 EST
Organization: UCLA Computer Science Department
Lines: 39


 I am posting this for a friend. Please reply to

 ARPA: koen@ucla-cs.arpa
 UUCP: ...!{cepu,ihnp4,randvax,sdcrdcf,trwspp,ucbvax}!ucla-cs!koen

 Thanks

---

 I'm having a problem using my apple IIe as a terminal when dialing in
 to a Unix system.  I believe the termcap I am using is correct for the
 apple IIe with 80-column card, but my apple doesn't seem to respond to
 any of the termcap features.  The termcap dependent programs like vi
 and more don't work properly.  I can't even clear screen by echoing ^L,
 which normally works when using the 80-column card.  I suspect that the
 software that I am using is intercepting control characters before they
 get to the apple display.

 Here is my system configuration:

 Terminal:	apple IIe with apple 80-col card.

 Software:	Transend1 communications program.

 Modem:		Prometheus 1200A (internal) with on-board firmware.
		(installed in slot #2)

 Termcap:	
	av|apple2e|Apple ][e with 80 column card:\
	:am:bc=^H:bs:db#0:bw:cd=^K:ce=^]:cl=^L:dF#0:cm=^^%r%+ %+ :co#80:\
	:cr=^M:dC#0:do=^J:do=^J:ho=^Y:kb=^H:kd=^J:kl=^H:ku=^K:li#24:\
	:ma=^Hh^Jj^Kk:nd=^\:nl=^J^M:dN#0:pt:se=^N:sf=50^W:sg#0:so=^O:\
	:sr=50^V:ta=9999^I:up=^_:


Does anyone have any idea what the problem is?

				Alan Quan