Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site harpo.UUCP
Path: utzoo!linus!philabs!cmcl2!seismo!harvard!talcott!panda!genrad!decvax!harpo!notes
From: notes@harpo.UUCP
Newsgroups: net.micro.apple
Subject: Half height drive manual/schematic
Message-ID: <2694@harpo.UUCP>
Date: Mon, 22-Apr-85 18:11:15 EST
Article-I.D.: harpo.2694
Posted: Mon Apr 22 18:11:15 1985
Date-Received: Fri, 26-Apr-85 21:04:50 EST
Sender: notes@harpo.UUCP
Organization: AT&T Bell Laboratories, Whippany
Lines: 16
Nf-ID: #N::37600018:000:574
Nf-From: !bob    Apr 22 16:58:00 1985

This weekend I bought a half height Apple 2 compatible drive from the Franklin
company at the Trenton NJ computer show.  For $99 it seems fine.  So far it
has worked reliably & boots protected disks.  According to Franklin it is made
by Mitac, an outfit from Taiwan which also makes Shugart look-alikes for the
Apple.

SInce the half height is so different electrically from the full height
I am a little concerned aboout not having a schematic or maintenance manual.
Can anyone advise me on where to obtain one?
.
						bob
						harpo\!bob
						ihnp4\!whuxb\!harpo\!bob