Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84; site brl-tgr.ARPA
Path: utzoo!watmath!clyde!bonnie!akgua!mcnc!philabs!cmcl2!seismo!brl-tgr!tgr!parker@nrl-css.ARPA
From: parker@nrl-css.ARPA (Alan Parker)
Newsgroups: net.unix-wizards
Subject: 3Com ethernet with uda-50 driver on 4.2 Vax
Message-ID: <10089@brl-tgr.ARPA>
Date: Sat, 20-Apr-85 21:58:01 EST
Article-I.D.: brl-tgr.10089
Posted: Sat Apr 20 21:58:01 1985
Date-Received: Mon, 22-Apr-85 07:28:47 EST
Sender: news@brl-tgr.ARPA
Lines: 12

Is anyone out there using a 3Com ethernet board along with a UDA50
(RA 81)?    I'm trying to bring up a system using the UDA50 driver
from Dave Gehrt @ riacs.   There is a problem with the way the 3Com
driver allocates the unibus memory that prevents it and the UDA50
driver from both working.  I've been told that there is a fix to the
3Com driver to fix this, but I haven't found anyone with the fix.

Any leads appreciated.   By the way, I recently asked this list about
a "Too many zero vectors" message during boot after adding a new
Able DH board.   It was fixed by rearranging a few boards on the Unibus.

-Alan