Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84 exptools; site ihu1m.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!ihnp4!ihu1m!gadfly
From: gadfly@ihu1m.UUCP (Gadfly)
Newsgroups: net.cycle
Subject: Re: REPLACEMENT_HAND-GRIPS
Message-ID: <414@ihu1m.UUCP>
Date: Mon, 6-May-85 14:08:55 EDT
Article-I.D.: ihu1m.414
Posted: Mon May  6 14:08:55 1985
Date-Received: Wed, 8-May-85 01:12:56 EDT
References: <171@nwuxg.UUCP>
Organization: AT&T Bell Laboratories
Lines: 21

--
> ... how do you mount replacement hand-grips?  I own a 1982 GS1100E
> and I bought GRAB-ON grips...
> these things just don't fit and they don't stretch. I really don't
> want to cut a slit in the grips and try to glue them on...
> 
> 					JERRY DROBICK

No, don't cut and paste 'em--if you do, you'll never be able to
replace them.  Try applying a dilute soap solution to the inside
surfaces of the grips.  The grips should then slide on quite easily.
Don't worry if they slip a little--they won't when the soap dries.
If they really don't fit, though, you may have bought the wrong
size--take a verniers to your bars to check their diameter.
-- 
                    *** ***
JE MAINTIENDRAI   ***** *****
                 ****** ******  06 May 85 [17 Floreal An CXCIII]
ken perlow       *****   *****
(312)979-7188     ** ** ** **
..ihnp4!iwsl8!ken   *** ***