Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84; site brl-tgr.ARPA
Path: utzoo!linus!philabs!cmcl2!seismo!brl-tgr!tgr!treid@MITRE-GATEWAY.ARPA
From: treid@MITRE-GATEWAY.ARPA (Tom Reid)
Newsgroups: net.micro
Subject: Kaypro connected to LAN at 9600 baud
Message-ID: <10336@brl-tgr.ARPA>
Date: Wed, 1-May-85 16:36:33 EDT
Article-I.D.: brl-tgr.10336
Posted: Wed May  1 16:36:33 1985
Date-Received: Fri, 3-May-85 20:18:30 EDT
Sender: news@brl-tgr.ARPA
Lines: 9

I have been trying to get my Kaypro to work on our LAN at 9600 baud through
a ROLM data phone (Kaypro goes to back of phone with a normal RS-232 cable).
The Kaypro is a IIx with two serial and one parallel ports.  The symptoms are
problem is
that about 1/3 of the characters are lost on data from the LAN.  The Kaypro
works fine on 1200 baud with a Ventel modem and dialup.

Is this a known problem with the Kaypro's?  Or do all roads lead to ROLM?
Thanks in advance for any help.  Tom.