Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.3 alpha 4/15/85; site sdcc6.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!gamma!epsilon!zeta!sabre!bellcore!decvax!ittvax!dcdwest!sdcsvax!sdcc3!sdcc6!ir491
From: ir491@sdcc6.UUCP (ir491)
Newsgroups: net.micro.pc
Subject: Diablo via parallel port under Xenix on PC-AT?
Message-ID: <2050@sdcc6.UUCP>
Date: Thu, 2-May-85 17:47:54 EDT
Article-I.D.: sdcc6.2050
Posted: Thu May  2 17:47:54 1985
Date-Received: Sun, 5-May-85 02:20:51 EDT
Organization: U.C. San Diego, Academic Computer Center
Lines: 8
Keywords: PC-AT Xenix Printer

I have been trying unsuccessfully to interface a Diablo
printer (1620) thru the parallel port on the PC-AT so
that printer output under Xenix will print on it. The
hardware set-up is functional since all works fine
under PC-DOS. The problem, as best I can figure, is
that the end-of-line marker is cr/lf in DOS and lf
in Xenix. The carriage does not return on my printer.
Anyone faced and solved this problem ? Please Help.