Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Posting-Version: version B 2.10.1 6/24/83; site ho95b.UUCP Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!ihnp4!houxm!ho95b!wcs From: wcs@ho95b.UUCP (Bill Stewart) Newsgroups: net.followup,net.sources Subject: Re: Need cpio.c source (really Sys V on VAXen with RA-81s) Message-ID: <401@ho95b.UUCP> Date: Fri, 3-May-85 17:20:24 EDT Article-I.D.: ho95b.401 Posted: Fri May 3 17:20:24 1985 Date-Received: Sat, 4-May-85 01:33:18 EDT References: <55@ecrcvax.UUCP> <675@burl.UUCP> <484@x.UUCP> <219@phri.UUCP> Distribution: net Organization: AT&T Bell Labs, Holmdel NJ Lines: 24 Xref: watmath net.followup:4847 net.sources:2874 DEC sells device driver software to use RA-81s and RA-60s on UNIX systems running either either System V or System V Release 2. (But NOT SYstem V Release 2 Version 2 . The paging version made some changes to the compiler and/or loader, including a new magic number, and there were a few files that DEC and the paging group both messed with. Some people here have gotten the two to work together, but it was not painless.) We've used their drivers, and they're not bad - the 750 version has a few mistakes that are fixed in the SVR2 version, but we're running System V on it so our boot procedure is a bit messy. The technical contact at DEC is Dave Leonard, at the Holmdel NJ office (1-201-946-9403). Bill Stewart Disclaimer - this of course does not represent policy of AT&T Bell Labs, DEC, or anybody. UNIX, DEC, VAX, RA***, and V are trademarks of AT&T, DEC, and various space invaders. -- Bill Stewart 1-201-949-0705 AT&T Bell Labs, Room 4K-435, Holmdel NJ {ihnp4,allegra,cbosgd,vax135}!ho95c!wcs