Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 (Tek) 9/28/84 based on 9/17/84; site teklds.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!mhuxt!houxm!vax135!cornell!uw-beaver!tektronix!teklds!dougs
From: dougs@teklds.UUCP (Doug Schwartz)
Newsgroups: net.cycle
Subject: Re: REPLACEMENT_HAND-GRIPS
Message-ID: <671@teklds.UUCP>
Date: Fri, 10-May-85 12:08:14 EDT
Article-I.D.: teklds.671
Posted: Fri May 10 12:08:14 1985
Date-Received: Sun, 12-May-85 04:40:11 EDT
References: <171@nwuxg.UUCP>
Reply-To: dougs@teklds.UUCP (Doug Schwartz)
Organization: Tektronix, Beaverton OR
Lines: 13
Summary: 

In article <171@nwuxg.UUCP> gtd@nwuxg.UUCP (Gerald T. Drobick) writes:
>I realize this is going to sound mighty stupid but how do you mount
>replacement hand-grips?

I hate to sound condescending, but did you notice that the two grips are
different sizes? The one with the larger ID is for the right side/throttle
pipe and the left for the left side/bare bar. I used to squirt a bunch of
contact cleaner on the pipe/bar and shove the grip on. The stuff dries
quickly and the grip won't slide off.

Doug (you build em -- I break em) Schwartz
CAE Systems, Tektronix Inc.
Beaverton, OR.