Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Posting-Version: version B 2.10.1 6/24/83 (MC840302); site ecrcvax.UUCP Path: utzoo!watmath!clyde!burl!ulysses!allegra!mit-eddie!genrad!panda!talcott!harvard!seismo!mcvax!unido!ecrcvax!pete From: pete@ecrcvax.UUCP (Pete Delaney) Newsgroups: net.micro,net.lsi,net.arch,net.graphics,net.sources,net.wanted,net.wanted.sources Subject: Re: meta assemblers Message-ID: <86@ecrcvax.UUCP> Date: Tue, 7-May-85 13:11:06 EDT Article-I.D.: ecrcvax.86 Posted: Tue May 7 13:11:06 1985 Date-Received: Fri, 10-May-85 02:37:25 EDT References: Reply-To: pete@ecrcvax.UUCP (Pete Delaney) Organization: ECRC, D-8000 Muenchen 81, W. Germany Lines: 26 Xref: watmath net.micro:10293 net.lsi:105 net.arch:1168 net.graphics:772 net.sources:2890 net.wanted:6368 net.wanted.sources:839 Yes, I wrote a AMD2901 cross assemble starting with the MIT Mical assembler. It only took a few days. This was done on the Honeywell Level-6. The guys here in France are supporting this UNIX system that we developed. Also, Hoenywell in Belarica has it. But it's so easy to do that it may be easier to just start with the MIT mical assembler or perhaps a System5 assembler with COFF stuff. Also, the 4BSD assembler seems nice in using #defines, I am not sure if System 5 assembler can do that. The guys to contact in France for the Mical assemblers are: lvbull!jim.uucp lvbull!cr lvbull!sylvain the stuff is burried Christian Reme's system, perhaps Jim has a copy. It's been 5 years since I wrote it. Good luck. -- -------------------------------------------- Pete Delaney - Rocky Mnt. Unix Consultant Phone: (49) 89 92699-139 European Computer-Industry Research Center UUCP: mcvax!unido!ecrcvax!pete ArabellaStrasse 17 UUCP Domain: pete@ecrcvax.UUCP D-8000 Muenchen 81, West Germany X25: (262)-45890040262 CSNET:pete%ecrcvax.UUCP@Germany.CSNET Login: ------------------------------------------------------------------------------