Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84; site brl-tgr.ARPA
Path: utzoo!linus!philabs!cmcl2!seismo!brl-tgr!tgr!Drew.Anderson@CMU-CS-C.ARPA
From: Drew.Anderson@CMU-CS-C.ARPA (Drew Anderson)
Newsgroups: net.micro
Subject: Building 1 of a kind systems
Message-ID: <10467@brl-tgr.ARPA>
Date: Tue, 7-May-85 11:19:50 EDT
Article-I.D.: brl-tgr.10467
Posted: Tue May  7 11:19:50 1985
Date-Received: Fri, 10-May-85 08:24:31 EDT
Sender: news@brl-tgr.ARPA
Lines: 11

I also have had good success with wire wrap here at CMU.  One thing that
is very important though is to use high reliability sockets.  It will
minimize your connector problems.  Augat and Robinson Neuget are vendors
of sockets and boards with these types of pins.  Gold plating on the
pin is usually not worth it, but on the insert it is a good idea.
(If you do not know what I mean by insert, look at a hi-rel socket.  The
hole that you put the pin in is actually an insert into the pin housing.)

				Drew Anderson
				DDA@cmu-cs-c.arpa
-------