Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Posting-Version: version B 2.10.2 9/18/84; site brl-tgr.ARPA Path: utzoo!linus!philabs!cmcl2!seismo!brl-tgr!tgr!crash!ihom@SDCSVAX.ARPA From: ihom@SDCSVAX.ARPA Newsgroups: net.micro.cpm Subject: WS with Prowriter Message-ID: <10804@brl-tgr.ARPA> Date: Sat, 18-May-85 00:20:11 EDT Article-I.D.: brl-tgr.10804 Posted: Sat May 18 00:20:11 1985 Date-Received: Sun, 19-May-85 06:02:09 EDT Sender: news@brl-tgr.ARPA Lines: 63 >I have a friend who just bought wordstar and a prowriter printer. She >is totally confused as how to configure the monster. I told her I >could help, but she is in Davis and I'm down here. Does anyone have >the printer patches for a version 3.3 wordstar for a prowriter handy. >It would save both of us alot of manual hunting and mailing costs. > >John Antypas >UC San Diego The Prowriter is configured as a "Non-backspacing printer" with "No communications protocol" and output is to the "Primary list device". The following are printer patches for WS version 3.33 . Rather than going through the long installation (WINSTALL), use DDT. The save length for this version is 75. Address: New value Comment -------- --------- ------- 6BB 02 ^P^A - alternate is elite 6BC 1B 6BD 45 6C0 02 ^P^N - normal is pica 6C1 1B 6C2 4E 6C5 02 ^P^V - modified for 1/8" linefeeds 6C6 1B 6C7 42 6CA 02 ^P^T - modified for 1/6" (normal) linefeeds 6CB 1B 6CC 41 6CF 02 ^P^Q - user defined: compressed mode ON 6D0 1B 6D1 51 6D4 03 ^P^W - user defined: compressed mode OFF 6D5 0D 6D6 1B 6D7 4E 6D9 01 ^P^E - user defined: elongated mode ON 6DA 0E 6DE 01 ^P^R - user defined: elongated mode OFF 6DF 0F 6E3 02 ^P^Y - redefined to toggle ON solid underline 6E4 1B 6E5 58 6E8 02 ^P^Y - redefined to toggle OFF solid underline 6E9 1B 6EA 59 Note: Although the Prowriter does not contain an ESCape sequence to turn compressed mode OFF, ^P^W is return to pica pitch. --Irwin Hom ...crash!ihom@ucsd