Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: $Revision: 1.6.2.16 $; site inmet.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!allegra!mit-eddie!genrad!decvax!cca!inmet!bruce
From: bruce@inmet.UUCP
Newsgroups: net.consumers
Subject: Re: Orphaned Response
Message-ID: <22100018@inmet.UUCP>
Date: Tue, 28-May-85 09:25:00 EDT
Article-I.D.: inmet.22100018
Posted: Tue May 28 09:25:00 1985
Date-Received: Fri, 31-May-85 04:45:43 EDT
References: <731@ssc-vax.UUCP>
Lines: 5
Nf-ID: #R:ssc-vax:-73100:inmet:22100018:177600:234
Nf-From: inmet!bruce    May 28 09:25:00 1985


Actually, the best way to handle it is by drilling a 3/8" hole, then
using a "metal nibbler" to chip it into a circle. Goes a lot faster 
than a file, though you'll have to touch up the edges if you want
them to be pretty and smooth.